AQUALINE PLUMBING, ELECTRICAL & Heating LLC

aqualine plumbers electricians heating Auburn WA

CALL US TODAY ON:

(253) 300-5347

Location:

Auburn, WA

How To Avoid Heating Units Disasters?

9/25/2018

It is a contraption that most people know little about however rely upon heavily. It’s your reliable heating unit, and it is quite complex, involving electricity, heating oil, or natural gas, water, forced air or steam and exhaust vent.

With that, there's a lot which can go wrong at any time.

While furnaces are reliable typically — many newer models could detect when something tends to be amiss and automatically shut off— they are not without risk. And if problems occur, the results could be shocking.

What can actually go wrong with heating units?

The most hazardous elements of the heating unit involve the fuels coming in and exhaust going outside. Here is what can occur:

A fuel leakage. If you’ve a gas heating unit and you smell some gas in your house, get out of your house right away. It isn’t time to perform an inspection yourself. The simple action of flipping a light switch on or operating anything electrical can trigger an explosion. The moment you get outside the house, contact the gas company and the fire department.

A carbon monoxide leakage. Because most of the furnaces involve burning fuels to generate heat, hence they produce carbon monoxide. This deadly and odorless gas is thought to vent out of your home harmlessly. But a furnace — especially an older one — could develop cracks that let gas to escape in your home. Issues with the heating unit’s venting system also can cause gas to leak in your house.

Install a carbon monoxide alarm at least on every floor of your house. It is recommended to place them far from heating appliances and vents that burn the fuel. Do not put it in your kitchen.

Heating Auburn

Fire and explosions. To make your entire house warm, a heating unit has to produce very high temperature. And keep in mind, it may be also burning fuel. The high temperatures together with fuel brings the chances of fire, therefore, store combustibles such as gasoline and paint thinners far from the furnace.

Excess heat buildup. In case you’ve forced warm air heating, don’t close more than 1/5th of registers at any once when heat is on. Closing them too away can cause excess amount of heat to generate in the heating unit.

Keep your heating unit as problems-free as possible

Just follow the steps below to ensure your heating unit keeps doing its work safely.

Shut it down whenever the cold season is finished. Follow manual or call the heating contractor for whatever must be a simple step of ever disabling your heating unit for summer. That must avoid anything from ever going wrong whenever it isn’t in usage.

Vacuum around furnace to keep the lint and other things that can burn easily from accumulating.

Have heating contractor do annual maintenance on the furnace to ensure it is running as effectively as probable and there are no issues. Issues homeowners may face include clogged filter which stifle air flow, crack in combustion chamber which leak carbon monoxide, defective ignition switches and thermostats that do not work properly. The expert will also check electrical parts. (Whether your heating system burns natural gas or oil, it also generally involves an electric component linked to the thermostat in order that the system fires up when required and turns off whenever it is not.)

Watch for oil leak near tank, if you’ve an oil-fueled heating unit. Oil-fueled furnaces need delivery of the oil to the tank on site. In case oil spills during the delivery or from the cracks in your heating unit, clean it up appropriately and if required call Heating Auburn before there occurs any mishappening.

7 Tips For Furnace Safety For Homeowners

9/22/2018

It has now got quite cold, as many of you could attest to personally! It is winters like these which make us glad to have the furnaces keeping our homes (and toes!) warm and toasty. All of us know the worth of a properly working heating unit. We also understand that a furnace can be hazardous if not handled appropriately. That is why we are dedicating a little bit of time for talking about a few imperative safety tips each furnace owner must be aware of.

Tips for Safe Operation of Heating Units
Furnaces are not toys, but the tools that should be properly handled and maintained by the professionals. That is why security tips for furnaces tends to be so imperative: you can keep your house comfortable, and both the house and your family secure during worst of the coldest winter months! Without more ado, here is the list of seven safety tips for your heating system or furnace:

Replace The Air Filter Once In A Month – Not just is changing your heating unit/ furnace filter imperative for house comfort, but this can be vital for your security too. Dirty air filters tend to be clogged with the dust, and this dust circulates all through your home. Clogged filters can result in furnace performance problems, safety hazard, and can also cause the furnace to fail down!

Test Your Carbon Monoxide And Smoke Detectors – In case you do not have a properly running carbon monoxide detector, then get one as soon as possible! Carbon monoxide poisoning tends to be no joke, and carbon monoxide leakage is one among the most hazardous risks a malfunctioning unit can present. Ensure you check the batteries regularly in your house’s detectors, and also test them to check they are in proper working condition.

Heating Auburn

Give Your Furnace Space To Breathe –While you are at it, you may want to provide your furnace a little space in general. As a furnace requires air to work, so you do not want it sucking the oxygen up in your house. Ensure that nothing blocking flow of air into your furnace; keep the home heat vents open only, and you might find your heating unit working more competently all-around.

Keep Flammable Product Clear Of The Furnace – Pointless to say, appliances intended to generate heat, and products which catch fire easily, don’t blend well. In case you utilize your furnace space for other aims —say, laundry or storage —make absolutely sure that you are keeping flammable materials and clothing at a secure distance from the furnace.

Establish A Few Furnace Safety Guidelines – It particularly goes for you with families; whether or not you sit everybody down to talk over it or post note on the fridge, set down a few rules for your furnace safety. Include things we have talked about here! Never let your kids play near the heating unit, and ensure that everyone in the home knows what should they do in cases of emergency. For instance, confirm that everybody knows where your heating system’s gas shutoff valve tends to be located, in cases of a gas leakage.

Schedule Your Yearly Maintenance – The best method to keep the furnace secure is to always keep it well maintained. Never skip on the heating units yearly maintenance because, oftentimes, a fully certified technician can spot and handle prospective issues before they’ve a chance to give any harm! Maintenance assists prevent breakdown and keep your heating unit in top, working conditions.

Contact An Expert If You Think That A Problem Is There – If you’re concerned about the furnace or think that a problem may be there, do not go rooting around yourself! Contact Auburn Heating and let them give a professional opinion.

Warning Signs Your Heating Unit Might Be Breaking

9/15/2018

Have you woken up ever freezing on a very cold winter night? In case you haven’t left a window open accidentally, possibilities are your heating unit has broken—and it could be a few sadly chilly days you have to wait while the heating unit is replaced or repaired. But, if you can spot a failing heating unit before it goes out actually, you can contact Heating Auburn to replace or repair the unit without needing to wait in cold! Here are some helpful warning signs your heating unit might be taking its very last breath:

Cold Air
It may seem clear, but a heating unit that isn’t heating your house is a warning indication of imminent heating unit’s failure. It can be a lot of different issues causing this, however most frequently it has to actually do with motor in blower fan. If blower fan is faulty, the unit does not have sufficient power to blow the air throughout the house. This can lead to cold spots in a few parts of the house. If your heating unit is not blowing any hot air at all, then it might be an issue with the pilot light or heat exchanger. It’s something a qualified professional should have a look at, in order to see if any repair can be done to fix it.

Age
Although it’d be nice if the heating unit lasted forever, its normal lifespan is around 15 to 20 years. In case you have had your heating unit for lesser than 15 years, ensure you do appropriate maintenance as per the specifications of manufacturer. Once your unit reaches 15 - 20 years age, it is time to begin paying attention to any unusual functions, smells, and sounds. If any of such things occur, contact a qualified technician for diagnosing the issue—they can let you known about how long the heating unit will last.

Increased Heating Bills
Are you utilizing your heating unit consistently and still your heating bill is increased substantially? It can be next warning sign that the heating unit is on its very last leg. Heating units try to keep certain temperature in the house always. If the unit is not efficient to heat the house as promptly as it did before, it might run longer, utilizing more energy.

Heating Auburn

Strange Noises
It is pretty clear that heating units make noises. If yours does not, you have a new model probably, or it is hidden somewhere inside your house where you cannot hear it. But, if you begin hearing squeaks or pops, it might indicate that something actually has come loose inside your system and should be replaced or repaired.

Dust
There always is going to be certain quantity of dust inside a house, regardless of how frequently you dust off the furniture. But, if you see an unusual collection of dust—or large amount coming from heat registers when heating unit kicks on—it can be your heating unit telling you it is ready to give the ghost up. Your unit takes dirty outside the air, filters it, then heats it, and then blows it all through your house. As your heating unit gets older, it then has a difficult time filtering. Certainly, you must change your filters in 1-3 months, however, it isn’t just your unit’s filter that assists to clean the air. Your blower fan and ductwork also assist to filter the air. If you see an excessive of dust, contact a certified technician.

Yellow Pilot Light
In case you’ve natural gas furnace, then check its pilot light—which must be blue always. If light is yellow, then it isn’t just a warning sign stating that your unit needs repairs, however that your heating unit can be leaking out carbon monoxide, a very poisonous gas. In case you notice yellow pilot light, excess condensation, rotten egg smell or rust, shut your furnace off immediately and contact an expert technician.

What Do You Need To Become An Electrician?

8/24/2018

There is no profession that can be categorized into lower class or upper class. Every profession is the same. And so is the profession of an electrician. Many people aspire to become an electrician. Although it is not as simple as it seems, but it is completely worth it if you really want to go for it. There is a systematic process or steps for becoming an electrician like Electrician Auburn. You need an electrician trade course to get better job opportunities and various electrical and logical skills to become an electrician.

  • You do not really need a professional degree for becoming an electrician. Only a high school diploma is needed to qualify for the job. Although you might want to consider getting enrolled in a good electrician trade course, as it opens gates for more opportunities to come in. The course duration varies from 1 to 2 years. Anyone with the proper knowledge of electricity and its various components can become an electrician, even without a course certificate.
  • In the course, students are taught about the possible types of electrical problems and mishaps which could take place in an industry or a household. The overall course combines studying theory in classroom on topics like electrical theory, and installation and maintenance of electrical systems along with on-the-job training under the supervision of experienced and skilled electricians. During their on-the-job training, the students practically learn to drill holes, set anchors as well as attach conduit. Later on, they learn to measure. They also get to know how to fabricate and install a conduit, along with the usual installation, connection, and testing of wire outlets and switches. They also learn diagrams and graphs of the electrical system. By the end of the course, the students become more capable of carrying out any work done by a skilled electrician. ​
Electrician Auburn
  • To become an electrician, you need various skills as well. You must have good manual handiness skills and good eye-hand coordination. You must be physically fit and be good at balancing your body. Better color vision is also needed because they need to frequently identify electrical wires by color. You should be able to interpret technical diagrams, blueprints, layouts, and graphs of the electrical circuit you are working on. You also need very strong troubleshooting skills as they are useful in figuring out the causes of problems as well as their solutions.
  • After completion of the certificate, you are open to all the job opportunities and careers that you can have as an electrician. It requires a lot of practical experience to become a skilled electrician. For a person with sharp, better, and great skills, opportunities are even bigger.
  • The job of an electrician mainly consists of wiring and maintenance. There are also various specialization fields for electricians and they have types like residential wiremen, inside wiremen, etc. They also have various responsibilities of their own apart from wiring and maintaining. Their majorly performed tasks are:
  • Installing and maintaining electrical components like wiring and fuses
  • Repairing electrical problems
  • Planning, layout, blueprint of work area and what, where and how to install
  • Finding solutions for electrical problems with the help of diagrams, charts, manuals, graphs, and specifications, troubleshooting circuits.

In conclusion, it is not as difficult to become an electrician unless you have intensive knowledge of electrical components. All you need is a Matric, an optional electrician trade course certificate, and various and specific skills. If you have all three of them, you are good to go. All the best!

Common Plumbing Mistakes Homeowners Make

8/14/2018

Many people like to carry out their own plumbing job, either to save their money or they enjoy doing so. While there is something to be mentioned for doing your own plumbing work, the common mistakes can cost you expensive results. Knowing pitfalls of doing the plumbing work yourself, and ways to avoid those can help you to take complete care of your house.

Usage of Chemical Drain Cleaners

For lots of homeowners, liquid drain cleaners seem a miracle product. Only some cups of chemicals in your drain can easily open pipes and send the waste water in the sewer. Unluckily, chemical drain cleaners could have a long lasting effect on the galvanized plumbing. Individuals who use this regularly may cause the pipes to become leaky and corroded.

There are lots of ways to clear the clogs without releasing any caustic chemicals in your house's plumbing. The alternative products include:

Natural Products: In order to clear a slower drain, sprinkle some baking soda in it, then pour vinegar and leave that solution to sit in for many hours. When you are done, flush with hot water.

Plumbing Auger: It’s a manually powered device similar to drain snake and it cleans most of the drain clogs without caustic chemicals or a Plumber Auburn.

If these tips don’t work at all, then contact a professional plumber. A great plumber can clear all the clogs inside your drain without using any harsh chemicals that can damage your house's plumbing.

Performing Unpermitted Jobs
Homeowners who make great changes to their house's plumbing without even pulling the right permits which could devalue their house. Homes with unpermitted jobs may take longer time to sell and might sell for lesser money.

Plumber Auburn

A few states need contractors to get permit, while others allow the homeowners to get permits themselves. The homeowners must either way make sure that the permits are pulled when they do major work like installations of bathroom or repiping. The permits allow local building officials for having oversight over house improvement projects. It even helps make sure that each home improvement project is performed to codes. Although getting the permit can cost you money up front, but a permit can easily protect you from fine down the roads while also making sure that your plumbing job is done appropriately.

Forgetting to Turn the Water Off
You will have to do so for maximum water related jobs. Failure to turning off water before starting a plumbing repair or improvement can result in gushing pipes, terrible mess, or small household flood. Get to know the house's plumbing prior to starting your next plumbing job. Turn the water off at your local shutoff valve. In case you cannot find that, then turn off at water main.

DIYing Without Right Training
A few homeowners take the plumbing challenges without having an insurance or license. Professionals know all regarding how plumbing works. They even go through vocational trainings to learn about right drainage and best equipment. They do an apprenticeship and get years of experience and knowledge before taking the licensing examination. All this expertise and experience ensures high quality of project and security of your house.

Taking on home improvement job that is over your head can result in damages to your house. Doing DIY works without knowledge of process can even cost much more money in future, if you are needed to pay the contractor to redo work later.

At times it's difficult to tell when any project is far beyond your skills level. The finest way to find is to discuss with plumbers prior to beginning a project.

When Should You Replace Your Toilet?

8/6/2018

If your toilet is giving trouble to you, it is simple to say that it should be replaced. Though installing new toilet definitely can be the best alternative for troublesome fixtures, it isn’t necessarily the single solution. When some repairs would be enough to resolve the issue, there’s no reason out there to spend the additional money to purchase new toilet and take time installing it. The main key is knowing about when to repair your toilet by Plumber Auburn and when should you replace it.

Without considering cosmetic problems, there still are a few instances when a new toilet tends to be a good idea. In order to help you find when to replace your toilet, have a look at a few common issues that you might encounter.

It Requires Lots of Repairs
Rebuilding your toilet can include a few things in the tank, such as its handle, fill valve and flapper. A few of such repairs can be done easily, but it’ll cost you some money and needs time. Weighing the repair costs versus new toilet is an extremely smart practice, particularly if the toilet suffers from the other issues listed here. If you are planning on replacing the toilet anytime soon, save money on the repairs and replace your toilet instead. It’ll save you wealth in long run, even if it’ll be a larger expense up front.

Plumber Auburn

Your Toilet Clogs Often
Is the toilet a nuisance since it need plunging often? Many of the old low flush toilets need more than one flush mostly. They also are often plagued with some random stoppages. It’s not good to plunge your toilet regularly. If it is aggravation for you, it is time to replace the toilet. You do not even need to give up water savings as low flush toilets now have come a very long way and new lines of water saver work much better.

A Porcelain Crack Is There
There are many times when some hairline cracks grow in the bowl or tank of your toilet. These minor cracks can turn in a flood at the worst time possible. Porcelain cracks also can be the cause of an active leakage. Inspect your bowl and tank for any cracks from time to time when you clean your toilet. If you notice a crack, it’s always an excellent idea to replace your toilet before it completely breaks. If crack is situated in toilet bowl, it’s not as much urgent to replace your toilet but keep your eyes out for water leakage when you flush. Any unnoticed leak can result in a ruined floor.

There Are Some Visual Scratches
As surface of toilet porcelain gets scratched or worn, it will become difficult to keep it clean. It’s more frequently the case with any older toilet which has been scrubbed and cleaned many times. In case you find yourself again and again cleaning the toilet, then it may be time to buy a new toilet and get rid of some additional maintenance.

To Save Your Water and Money
In case you don’t already have low flush toilets, saving water might be a good enough reason to replace your toilet. You may save quite a lot on your water bills every year with low flush toilets. The water saving toilets utilize less than two gallons water with every flush, which considerably is less than old 3-gallon consuming toilets. Not just are you helping your environment by saving some water, you’re also helping yourself save your money. Utilities are going to only continue to increase so saving on the household water use makes sense.

Contact Us:

*

Indicates required field

Submit